LED FLOOD/SPOT COMBO W/OFF-ROAD PERFORMANCE SHIELD - 40"/1016mm
This 40 inch LED Light Bar with spot and flood multi beam technology comes complete with a built in adjustable light shield and brackets to mount either below or in front of a Slimline II Roof Rack.
- 40 Inch Dual Row LED Light Bar features approximately 19,200 lumens.
- Combination of 8 degree narrow spot beam pattern for focusing on long range distances AND 120 degree wide flood beam pattern for close but wide range illumination immediately surrounding the vehicle.
- The aluminum housing is waterproof, dustproof and rattle proof. Built for Off-Road performance in harsh outdoor conditions.
- Expected LED life of 30,000 hours.
- Mounts to the front of a Slimline II Roof Rack via the T-slots of the front combined slat profile OR under the Rack using included mounting bracket solutions.
- Mounting brackets are made of 3CR12 stainless steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks.
- The robust light shield protects the 40 inch LED Light Bar from small rocks and can rotate 100 degrees not braking the beam pattern when the light is in use.
- The light shield can additionally control light fall and prevent excessive glare on the vehicles hood/bonnet.
- Optional Wiring Harness available (please choose from drop down box above). A single light complete wiring harness includes battery connections, in-line 30 amp fuse, 40 amp relay, approx. 10'/3M of wiring, push-button panel-mount switch, and a Deutsch weatherproof connector to plug in your light.
- Includes all installation hardware and fitting instructions.
PLEASE NOTE: A minimum of 90mm (3.54 inches) clearance is needed between the bottom of the Front Runner Rack and the vehicle's roof in order to fit this product using the under rack brackets.
Specific Front Runner accessories, Here!
1 x 40" LED Light Bar (Multi Beam with Spot & Flood)
1 x Set of Front Rack Mount Brackets
1 x Set of Under Rack Mount Brackets
1 x Protective Front Cover
1 x Single LED Wiring Harness with ATP PLug (optional, please choose from drop down above)
Installation Hardware & Fitting Instructions
Black powder coated 3CR12 stainless steel
1110mm (43.7") L x 117mm (4.6") W x 78mm (3.1") H
LIGHT SPECIFICATIONS :
- 40 Inch Dual Row
- Input Voltage: 9-32 Volts DC
- Power Consumption: 240 Watts / 16 Amp at 12 Volts
- 80 High Intensity CREE LEDs
- Color Temp: 6000k
- Lumen Output: Approx. 19,200lm
- Beam Pattern: 8 Degree Spot Combination Flood
- Protection: Over / Under Voltage protection
- Reverse polarity protection
- Housing Material: Aluminum extrusion
- Mounting End Pieces: Die cast aluminum alloy
- Lens Material: High Light Transmission Polycarbonate
- Dustproof, Waterproof
More L.E.D.´s Bar, Here!
For delivery information, please click Here!